Details
Plug-in slot sensor GP-P series
High response frequency, rich models, easy connection
Rich in variety, K type, L type, T type, Y type are available, two-way output detection receiving status
Features
.png)
Technical Parameters
| Model (NPN) | GP-P670K | GP-P671L | GP-P672T | GP-P673Y |
| Model(PNP) | GP-P670KP | GP-P671LP | GP-P672TP | GP-P673YP |
| Appearance |  |
 |
 |
 |
| type | K-Type | L-type | T-Type | Y-Type |
| Detection distance | 5mm(slot width) | |||
| Standard test objects | Opaque objects larger than 0.8mm*1.2mm | |||
| Repeatability | ≤0.03mm | |||
| Output Mode | NPN or PNP open collector | |||
| Lighting mode | L.on (light-incoming action)/D.on (light-blocking action),Switchable | |||
| Indicator Lights | The light goes off when an object is detected.Lights up when there is no object | |||
| Response frequency | 3kHz | |||
| light source | Infrared light | |||
| Operating voltage | DC5V~24V | |||
| Residual voltage | ≤1V (load current 50mA) | |||
| Current consumption | ≤8mA | |||
| Protection Circuit | Surge protection,Reverse polarity protection,Overload protection | |||
| Ambient light | Illuminance of the light receiving surfaceIncandescent lamp;≤1000Lux | |||
| Ambient temperature | Working temperature: -25℃~+55℃Storage: -30℃~+80℃, no freezing | |||
| Ambient humidity | Working: 5%~85%RHStorage: 5%~95%RH, no condensation | |||
| Withstand voltage | AC,1000V1 minute,Between all power connection terminals and the housing | |||
| Vibration resistance | 10~55Hz, amplitude 1.5mm, 2 hours each in X, Y, and Z directions | |||
| Insulation resistance | Between all power connection terminals and the housing, more than 20MΩ ( based on DC250V) | |||
| Protection level | IP50 | |||
| Material | PC | |||
| Outlet mode | Connectors | |||
Wiring method
View more about Plug-in slot sensor GP-P series on main site