Details

---

Ultra-thin photoelectric sensor PE series

 

Ultra-thin optoelectronics, light and durable

Ultra-thin appearance with a thickness of 4.5mm, fast response detection of <1ms, and even the smallest object Φ2 can be detected
 

Features

 

Technical Parameters

 

model	PE-FD14N	PE-FT13N	PE-LT13N
type	NPN	NPN	NPN
Detection method	Diffuse reflective type	Through-beam type (front)	Through-beam type (side)
Detection distance	2~30mm﹡¹	0-500mm	0-500mm
Minimum detection object	⊘0.1mm copper wire﹡²	⊘Opaque objects larger than 2mm, not affected by the color of the object being detected	⊘Opaque objects larger than 2mm, not affected by the color of the object being detected
Response time	< td="">
Response frequency	1KHz
Repeatability	0.05mm or less
light source	Red LED
wavelength	650nm
Operating voltage	DC 12~24V±10%
Current consumption	＜20mA
Action Mode	Mode selectable, ON when shaded or ON when light enters
Spot size	Approx. ⊘13mm@30mm	About ⊘3mm@30mm	About ⊘3mm@30mm
Protection Circuit	Surge protection circuit, short circuit protection, reverse polarity protection
Output indicator	Orange LED (lights up when output is ON)
Power indicator	Green LED
Ambient temperature	-10°C~+55°C (note that it cannot be frozen), storage: -30C~70C
Ambient humidity	35%RH~85%RH, Storage: 359RH~85%RH
Ambient illumination	Self-incandescent lamp: illumination of the light receiving surface ≤ 3000Lux
Vibration resistance	10~55Hz, double amplitude 1.5mm, 2 hours each in X, Y, and Z directions
Impact resistance	500m/S², 3 times each in X, Y, and Z directions
Protection level	lP65
Connection	Four-wire system, lead-out type, black wire is ON when light enters, white wire is ON when fast light enters
Shell material	PC, Polycarbonate
weight	About 20g	The transmitter and receiver are about 20g each.